About 2 months into the familiarization with RV lifestyle and the PC coach in particular. This is a 4 yr old 2551 w/ slide. It has the convertible couch in the slide. When in couch mode (?), there are 2 bolts in the floor, one just in front about in the middle, the other on the driver's end of the couch just at the edge of the slide out. The flooring is vinyl, and is cut-out around the bolts. The top of the bolt is slightly above the level of the surrounding vinyl. We think there used to be carpet on the floor, but was removed sometime in the past.
I'd like to remove these bolts, but have no idea what might fall off if I do!
And once removed, is there a way to fill in the vinyl but still be able to find the holes some day in the future in case they're needed? I did find a suggestion for repairing vinyl gouges (Seamfil), which I might try, and I suspect that would make the the patched area obvious. But would welcome any other suggestions here.
We just recently purchased 2 Spiderlegs (Spiderlegs.com) laptop tables, and that bolt interferes with the table bottom. And some of us don't like stepping on the bolts.
Thanks in advance for any help,