Pages: 1 [2]   Go Down
« previous next »
Print
Author Topic: Skin Care for our Cruiser  (Read 6460 times)
lghjr
SuperHero Member
******

Helpful Rating: 44
________
OwnPC: No
NewUsed: Used
PurchDate: Used to own a 2700
Model: 2700
ModelYear: 2007
Slide: Yes
________
Posts: 306



View Profile
« Reply #15 on: June 21, 2013, 08:56:30 pm »
Roundy round dirt sprint cars us a liquid dissolved in water, spray on, and left to dry, sure makes getting the mud off easier after and between races.  I have used it on the front of a motorhome during high bug season (those little black ones) and wiping the bugs off with minimum water is a nice touch. Spray bottle before leaving the next day and you are set again.  I used Mudd-Off IIRC.

http://www.smileysracing.com/shopping/?ic=1896


The link is for info only. I don't know tlhem.
« Last Edit: June 21, 2013, 08:59:20 pm by lghjr » Logged
Bruce
Guest
« Reply #16 on: July 06, 2013, 06:52:50 pm »
I've finally had time apply UV protection on our new 2350 as recommended by Diamond Shield.  Is it important to put some type of UV protection on the roof, too?  The roof seems to be made of material different from that on the rest of the body.  I don't think it would be a good idea to apply wax up there.
--Bruce
Logged
BarbRN
Hero Member
*****

Helpful Rating: 11
________
OwnPC: Yes
NewUsed: Used
PurchDate: May 25, 2013
Model: 2551
ModelYear: 2010
Slide: Yes
IntColor: beige
ExtColor: tan
Location: Florida
________
Posts: 134



View Profile
« Reply #17 on: July 18, 2013, 02:46:36 pm »
We tried the flagship McGuires and in the most oxidized place on the fiberglass over the windshield, it's not doing that much.  Somebody said the buffer which has a micro fiber cloth on it, isn't enough.  Three tries isn't getting all the oxidation off. Now What?
Logged
ron.dittmer
SuperHero Member
PCPC
*******

Helpful Rating: 299
________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: North/East, IL
________
Posts: 3510



View Profile WWW
« Reply #18 on: July 18, 2013, 03:57:57 pm »
Our first rig (Toyota/Mirage) was 100% gel-coat fiberglass.  Over the 24 years we owned since new, I was not able to control the chauk-like weathering.  From a serious polishing compound and orbital buffing, to a fast cover-over with magic goop from a bottle, nothing worked to my satisfaction.  That was one reason why we went with a full body paint job with our PC.

I know it's not the answer you were looking for.  Sorry about that.

About that Red Max Pro floor polish I mentioned higher in this thread.  Has anyone here tried it on their PC?  I don't know how well it holds up to the elements.  Here are pictures of it in-use.  http://www.fiberglassrv.com/forums/f56/check-this-out-not-poliglow-time-will-tell-43004.html
« Last Edit: July 18, 2013, 04:01:35 pm by ron.dittmer » Logged
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
lghjr
SuperHero Member
******

Helpful Rating: 44
________
OwnPC: No
NewUsed: Used
PurchDate: Used to own a 2700
Model: 2700
ModelYear: 2007
Slide: Yes
________
Posts: 306



View Profile
« Reply #19 on: July 18, 2013, 04:20:13 pm »
Cautionary tale here: I believe that Lowes no longer sells Red Max, some is available on eBay, FWIW.  Don't remember where I read that.
Logged
BGolden
Hero Member
*****

Helpful Rating: 39
________
OwnPC: Yes
NewUsed: New
PurchDate: January 2008
Model: 2350 Ford
ModelYear: 2008
Slide: No
IntColor: Maple/Beige
ExtColor: White
Location: Bellingham, Ma
________
Posts: 254



View Profile
« Reply #20 on: July 22, 2013, 06:14:28 pm »
From the RV.net Blog

http://blog.rv.net/2013/07/protect-guns-and-rvs-with-corrosionx/?utm_source=feedburner&utm_medium=email&utm_campaign=Feed%3A+RvnetBlog+%28RV.net+Blog+Daily+Updates+Feed%29

Bill G
Logged
Bill and Karen Golden
ge_montana
Sr. Member
****

Helpful Rating: 10
________
OwnPC: Yes
NewUsed: Used
PurchDate: January 4, 2012
Model: 2551
ModelYear: 2010
Slide: Yes
IntColor: green
ExtColor: green half
Location: St. Petersburg FL - Red Lodge MT
________
Posts: 93


I love Photography, sailing and fishing


View Profile WWW
« Reply #21 on: August 30, 2013, 06:42:16 am »
I am doing what we did on our white sailboat hull, no wax as it tend to lead to a chalk finish faster, rather we used Astroshield. Washed and applied once a year. The company went out business when parents died and children fought over value of business. This happened about 6 years ago, until then it was in every auto and marine store here in Florida.

The patent was bought by a chemist in Ocala who now sell it via the Internet. It is same stuff as before. Our hull was reprinted 14 years ago and when we sold it, it still had a shine no chalk.

Google Astroshield, you see the original yellow can but it now comes in a nondescript bottle. The children wouldn't sell the right to use the old can for a reasonable price.,

Greg Matthews

Logged
Greg Matthews
Photographer
EastOfYellowstone.com
BGolden
Hero Member
*****

Helpful Rating: 39
________
OwnPC: Yes
NewUsed: New
PurchDate: January 2008
Model: 2350 Ford
ModelYear: 2008
Slide: No
IntColor: Maple/Beige
ExtColor: White
Location: Bellingham, Ma
________
Posts: 254



View Profile
« Reply #22 on: August 30, 2013, 08:21:20 am »
Here is the product I purchased from Meguiars and applied last week to my 2350.   
http://www.meguiarsdirect.com/product_detail.do?q=4671

My neighbor owns a small Boston Whaler fleet and told me that he uses a Mr. Clean Magic Eraser along with Dawn dish detergent in warm water to remove the oxidation.  It worked.

After removing the oxidation I applied this Meguiar's  3 step system with DeOxidizer, polish and wax.  I am happy with the results. Thank Goodness it's a small RV it took 4 days to git er dun.    Grin

Bill G
Logged
Bill and Karen Golden
Pages: 1 [2]   Go Up
Print
« previous next »
 
Jump to: