Helpful Rating: 29
Until I had the doghouse out of the vehicle, I didn't realize just how close we sit to a V10 engine that spins at 2600 rpms at 64 mph! It's right there by our knees!
I now have 27 sq ft of Deamplier material on the floor from the firewall to the back of the chairs, in the passenger door and all in the doghouse. It is time for a test drive. I got on the interstate where there is smooth asphalt and got to cruising speed of 62 mph. There is a noticeable difference in engine noise. I didn't have a passenger so I couldn't test if conversing was improved. However, my dB meter is now averaging 54.5 dB, an improvement of about 3 dB. But what does that mean? Well, if you remember, a 10 dB difference is perceived as a doubling of the heard noise, so in very layman's terms, the noise has been reduced by about 1/3 if my calculations and understanding of noise is correct. I called darling wife on my cell phone at 65 mph and I was able to carry on a conversation with her without straining my hearing. I couldn't do that before.
Noise from the doghouse is greatly reduced. However, I still hear a lot of engine noise and it sounds like it mostly coming through the dashboard, dash area, and hood. I also hear a lot of wind noise around the driver's mirror. I think I will order the JC Whitney hood insulation kit (Hushmat) and add material to the driver's door. I also might try to find a mat I can lay on the dash. I've seen some custom mats for the dash that are made to protect the dash from sun damage. Maybe something like this could help.
All in all, I'm very happy with the improvement in noise abatement, but I'd like to knock another 2 or 3 dB off and make the PC as quiet as my truck. To date, I have about $170 invested and 8 hours of time. I could have saved $12 by not buying the adhesive I didn't need (I thought I would need it to glue the existing doghouse insulation back in). I'll be glad to answer any questions. Mark