Margie
Sr. Member
Helpful Rating: 7 ________
OwnPC: Yes
NewUsed: New
PurchDate: 10/09
Model: 2350 Sprinter
ModelYear: 2010
Slide: Yes
ExtColor: Full body paint/latte
Location: CA ________
Posts: 54
|
 |
« Reply #15 on: December 28, 2009, 05:00:50 pm » |
|
Ron, I have been looking all over for a towel rack similar to the one you used in your 2350's bathroom and can't find one. May I ask what brand it is and where you might have bought it? We love many of the improvements you have done to your motorhome. We picked up our 2350S late in October and love it but are trying to make some improvemets.
Margie
|
|
|
|
|
Logged
|
|
|
|
ron.dittmer
SuperHero Member PCPC
Helpful Rating: 262 ________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: West Dundee, IL ________
Posts: 3084
|
|
« Reply #16 on: December 28, 2009, 05:31:27 pm » |
|
Ron, I have been looking all over for a towel rack similar to the one you used in your 2350's bathroom and can't find one. May I ask what brand it is and where you might have bought it? Margie Hi Margie, I asked my wife where she bought it from, but she couldn't say for certian. She said it was either Walmart, Target, or Meijers, but could not completely rule out a dollar store either. Brand is unknown. Thanks for the compliments. This post has been a huge hit with PC owners. ADDED 12/2015: I have recently seen our towel rack being sold in Bed Bath & Beyond, and also The Container Store. Ron |
|
|
|
« Last Edit: December 29, 2015, 09:02:03 am by ron.dittmer »
|
Logged
|
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
|
|
|
gradygal
SuperHero Member
Helpful Rating: 117 ________
OwnPC: Yes
NewUsed: New
PurchDate: March 2012
Model: 2910
ModelYear: 2013
Slide: Yes
IntColor: cherry
ExtColor: slate gray full body paint
Location: Florida ________
Posts: 740
our 3rd PC--Custom 2910
|
|
« Reply #17 on: December 29, 2009, 05:43:45 pm » |
|
Ron,
What's the deal with Dancing with the stars?
Judi
|
|
|
|
|
Logged
|
Judi and George Nicholson
Punta Gorda FL
|
|
|
ron.dittmer
SuperHero Member PCPC
Helpful Rating: 262 ________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: West Dundee, IL ________
Posts: 3084
|
|
« Reply #18 on: December 29, 2009, 07:22:16 pm » |
|
Ron, What's the deal with Dancing with the stars? Judi My wife and I had been taking ballroom dance lessons at a Fred Astaire dance studio for 1.5 years, ending last August. Our neighbors found out about it, and we suddenly found ourselves competing in a fund raising event for PADS (Public Action to Deliver Shelter) of Elgin, IL. It is a homeless shelter in our community, here: www.padsofelgin.orgWe are competing against 5 other couples. Each couple is assigned a dance instructor (also volunteering) who coreagraphs a dance routine to a particular song. We are doing the Rumba. The dance competition is the evening's entertainment. But our mission is to seek sponsors too....basically everyday people donating to the homeless shelter, through a website using their credit or debit card, tax deductible of coarse. They select which dance team they support with their donation. My wife Irene and I are dance team #5. Details of the event are here: http://www.padsofelgin.org/news_events.htmlIt has been very intense training. We are amatures trying to perform as professionals. In our early 50s, we are being tested in a few different ways, physically and psycologically. The Rumba we are doing has a mid-lift, a long dip, and a few sexy moves. It will be very interesting to see how it turns out. We will post the dance on You Tube afterwards. |
|
|
|
|
Logged
|
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
|
|
|
Margie
Sr. Member
Helpful Rating: 7 ________
OwnPC: Yes
NewUsed: New
PurchDate: 10/09
Model: 2350 Sprinter
ModelYear: 2010
Slide: Yes
ExtColor: Full body paint/latte
Location: CA ________
Posts: 54
|
|
« Reply #19 on: January 03, 2010, 03:13:19 pm » |
|
Thanks Ron. I will just keep looking to see what I can find for a lightweight towel rack. Must be something out there for us. Happy New Year to you. We are looking forward to lots of trips in our new Phoenix Cruiser in 2010.
Margie
|
|
|
|
|
Logged
|
|
|
|
jwhyt10
Jr. Member
Helpful Rating: 6 ________ ________
Posts: 8
|
|
« Reply #20 on: January 05, 2010, 08:07:45 am » |
|
Those were great ideas you had for the compartments in the front. I copied them in my 2010 2400 and they came out great. I would really like to add the water pressure tank and would appreciate it if you either post or send me the instructions. My email is serenitymotel@hotmail.com. Thanks for all your great postings. John, Vermont |
|
|
|
|
Logged
|
|
|
|
ron.dittmer
SuperHero Member PCPC
Helpful Rating: 262 ________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: West Dundee, IL ________
Posts: 3084
|
|
« Reply #21 on: January 05, 2010, 10:13:47 am » |
|
John, Vermont I emailed you a WORD document and 7 pictures on how I installed the water pressure tank. I don't know where your water pump is located on your 2400, but understand the pressure tank could be mounted anywhere along the cold water high pressure side of the pump. It doesn't have to be next to the pump, though it is nice to have the mechanics all together. On-line, there are companies that sell a real nice stainless steel version with nice mounting feet. If you have the money to spend, they make the installation much easier including a place to mount the pump itself to the tank if so desired. This allows for vertical stack up of the pump on top of the tank to use less floor space. Here is what I am describing. http://www.amazon.com/Pre-Charged-Stainless-Steel-Accumulator-Gallon/dp/B002MBORYU/ref=sr_1_4/182-9098293-1198113?ie=UTF8&s=sporting-goods&qid=1262704002&sr=8-4I went with the cheap $30 Home Depot version because I didn't know what to expect from it, and didn't want to spend a lot of money with the thought of removing it soon thereafter. During our following trip, I knew the tank was there to stay. So my point here is, I would have spent the big money on a tank with mounting feet. Those forward cabinet shelves & vertical slots really make that space work for us. I am glad to read of someone else utilizing that idea. You are the first that mentioned it. It isn't an easy project if you want it to look like a professional installation. Ron Dittmer |
|
|
|
« Last Edit: January 05, 2010, 10:23:32 am by ron.dittmer »
|
Logged
|
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
|
|
|
rockrat
Full Member
Helpful Rating: 6 ________
OwnPC: Yes
NewUsed: New
PurchDate: April, 2010
Model: 2350 Ford
ModelYear: 2010
Slide: Yes
IntColor: grey
ExtColor: umbra
Location: NC ________
Posts: 42
|
|
« Reply #22 on: January 23, 2010, 08:33:24 am » |
|
Ron those are very nice improvements. Could you please e-mail me the details on the construction of the water pressure tank? Pictures will be very helpful as well. My e-mail address is donaldip59@gmail.com. Thanks in advance Donald |
|
|
|
|
Logged
|
2010 2350 with slideout
|
|
|
NC Sailors
Sr. Member
Helpful Rating: 23 ________ ________
Posts: 52
|
|
« Reply #23 on: January 29, 2010, 09:18:04 am » |
|
Attached is an image of "custom" tank installation I saw on a PC-2350 at the Phoenix factory in October.
|
|
|
|
|
Logged
|
~ ~ ~ ~ ~ (\_ ~ (\_ ~ (\_~ ~ ~ ~
|
|
|
ron.dittmer
SuperHero Member PCPC
Helpful Rating: 262 ________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: West Dundee, IL ________
Posts: 3084
|
|
« Reply #24 on: January 29, 2010, 11:12:27 am » |
|
It is great to see the factory implementing some of my improvements along the way, though I am sure they would find them without my help.
|
|
|
|
« Last Edit: March 09, 2010, 03:29:10 pm by ron.dittmer »
|
Logged
|
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
|
|
|
ron.dittmer
SuperHero Member PCPC
Helpful Rating: 262 ________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: West Dundee, IL ________
Posts: 3084
|
|
« Reply #25 on: August 27, 2010, 10:54:05 am » |
|
I don't yet have pictures of this to share, but it is pretty easy to imagine.
From the day we bought our 2350, when driving our rig on bumpy roads, we would get this strange banging noise in the area around the DVD player. It drove me nuts, nuts, nuts. I had my wife look high and low, but we never could find the culprit until this past trip.
What is it? The roof top antenna.
When we got home this past week, I got up there and added stick-on felt pads, the kind you use to slide chairs on wooden floors. I added them to the feet of the antenna and also on the edges of the wings. I have not driven the RV on bumpy roads since so I cannot say for certain that I resolved the problem. But it's a good prognosis.
ADDING: Taking a trip the following RVing season, the felt pads resolved that terrible banging for good.
|
|
|
|
« Last Edit: December 29, 2015, 09:05:30 am by ron.dittmer »
|
Logged
|
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
|
|
|
ron.dittmer
SuperHero Member PCPC
Helpful Rating: 262 ________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: West Dundee, IL ________
Posts: 3084
|
|
« Reply #26 on: December 12, 2010, 02:01:23 am » |
|
Added.....
#22 Replacing Barrel Chair With 3rd Captain Seat.
|
|
|
|
« Last Edit: January 05, 2011, 12:06:50 pm by ron.dittmer »
|
Logged
|
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
|
|
|
ron.dittmer
SuperHero Member PCPC
Helpful Rating: 262 ________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: West Dundee, IL ________
Posts: 3084
|
|
« Reply #27 on: January 08, 2011, 11:19:00 pm » |
|
I just replaced my barrel chair with a 3rd captain seat. It takes less than 10 minutes, a 1/2" deep socket, and a 3/4" standard socket. Super easy to swap them.
|
|
|
|
|
Logged
|
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
|
|
|
JackD
Hero Member
Helpful Rating: 30 ________
OwnPC: Yes
NewUsed: New
PurchDate: 2017 (latest)
Model: 2350 Sprinter
ModelYear: 2017
Slide: Yes
IntColor: Cherry
ExtColor: Greystone
Location: Delaware ________
Posts: 185
|
|
« Reply #28 on: January 10, 2011, 11:42:50 am » |
|
Ron:
Looks GREAT!!! BTW, got the sway bars problems worked out, --- Roadmaster admitted they sent the wrong fittings for the rear bar, sent the correct, all installed, and ready to go. Makes a BIG difference while stopped, and I am going to see what improvement whe we go south in a few weeks.
Jack
|
|
|
|
|
Logged
|
|
|
|
ron.dittmer
SuperHero Member PCPC
Helpful Rating: 262 ________
OwnPC: Yes
NewUsed: New
PurchDate: June 2007
Model: 2350 Ford
ModelYear: 2007
Slide: No
IntColor: Green&Gray Cherry
ExtColor: Full Body Gray
Location: West Dundee, IL ________
Posts: 3084
|
|
« Reply #29 on: January 10, 2011, 01:11:09 pm » |
|
JackD,
Yep, it's great when parked. Just wait when you are on the open road. You'll be saying....."Why isn't the factory offering these as an option?"
|
|
|
|
|
Logged
|
Ron & Irene Dittmer, 2007 Model 2350, Ordered Without A Slideout
|
|
|
|
