Here are some things I have done to our 2007 PC-2350 to make it more "friendly".1) Improving Space Efficiency In Front Cabinets
I have the cherry finish option. I found close matching pre-finished shelving at Home Depot.
The top shelf holds our huge white binder having everything pertaining to the RV, from product/owners manuals to vehicle registration and insurance. The shelf also stores our big Rand McNally Road Atlas.
Over The Passenger - Added one shelf to store our widescreen laptop computer. Also added a power strip underneath it with outlets at various orientations to accomodate all our different charging power supplys. The laptop, camera, cell phone, video camera, & two-way radios, all plug in at the same time. All charger cradles will be staged, with their cords tie wrapped, ready to activate at the flip of a switch when we are driving, plugged in, or when the generator is running.2) Two Gallon Water Pressure (Accumulator) Tank
It improves the performance of the fresh water pump. Water pressure and temperature is now consistent when dry camping, especially benefitial when showering. The pump runs very quietly and cycles on and off nicely at comfortable intervals. No more quick on/off groaning and resonating from the pump, extending the life of the pump. Write-up with pictures available. Provide your email address.
Cost Of Project $50
Given it's location in the outdoor storage compartment, I made an enclousure to protect everything.3) Slide-Out Bedroom Tray
It mounts under an overhanging cabinet at the foot of our bed, utilized as a shelf. When we don't want it, we slide it under the cabinet and it's gone.
Cost Of Project $204) Entry Door Limiter
This limits the swing of the entry door. On a strong windy day, the door can easily get ripped out of your hand, swing 180 degrees around, and crash into the side of the RV. When my awning poles are attached to the side of the RV, this prevents the door from hitting an awning pole. The limiter is engaged and disengaged in seconds with the door open or closed, is not visible when not needed, and is self storing. It also never gets in the way when entering or exiting the RV. The rope does stretch a little, so it offers a very nice "soft stop" feel. Flange weld nuts are perfect to hook the rope on.
Cost Of Project $5
Flanged Weld Nuts work great for hooking the rope on and off from.5) Window Shade String Reinforcements
I reinforced the shade tensioners that hold the shade strings at the bottom. No more issues with those things pulling out of the wall when bumped hard, and bumping them is very easy by the dinette and bed. The solution looks nice too. Write-up, pictures & drill template available. Provide your email address.
Cost Of Project $3 per window6) Foam Rubber, Drawer & Cabinet Liners
Wow, what a difference this made with rattles in the RV. We bought solid foam rubber drawer liner material on a roll from a home improvement center. Everything stays put better, and rattles much less.
Cost was $7 for a nice size roll. A few rolls were needed.7) Wall Clock With Indoor & Outdoor Thermometer
You hang the clock on the wall, and stick the transmitter in it's holster, hung inside the rear compartment. The clock displays a lot of information including indoor & outdoor temperatures, and indoor relative humidity. It is also an alarm clock. I mounted it to the left of the entry door so it forces us to get out of bed to turn it off. It's great to know the outside temperature.
Cost was about $308) Tow Our Jeep Liberty
With a Unified Tow Brake, our Liberty is very easy and safe to tow.9) Suspension Improvements On Our 2007 Ford E350 Chassis
Having all this work done by a truck suspension shop was a costly $3900, but I cannot emphasis enough, how this has improved the handling, comfort, and safety of the motor home by leaps and bounds. Our PC-2350 now handles like an SUV...not an RV. No more wandering, boat rocking, swaying, or wrestling when trucks go by or with cross-winds or on uneven road surfaces.....you know....those highways with the groves from heavy truck traffic. My wife can sit at the dinette, and her coffee will stay put on the table. You can also nap in the rear bed without getting tossed around. Mountian roads are taken with the greatest of confidence, even when towing the Jeep Liberty. The RV stays planted on the road in a hard turn, with the brakes able to do their job well. This package also eliminates any need for stabilizer jacks when parked.
If you are mechanically inclined, you can install some of this yourself and save big money. I bought Roadmaster sway bars, but I have since learned that another company Helwig, makes a much lower cost product that is also easier to install.
- Replaced the smaller stock front sway bar with heavy duty Roadmaster version
- Added a rear heavy duty Roadmaster sway bar as there was none on the 2007 E350 chassis to begin with
- Added a rear Henderson trac bar (the blue thing) to eliminate rear tail wagging (Both In Same Picture)
The landscape timbers are simply being stored under the RV. Just ignore them.
- Replaced the stock shocks with Koni-RV adjustables, set to the stiffest setting
- Replaced the stock steering stabilizer with a heavy duty version by Safe-T-Plus
- Got A Wheel Alignment Done
The shop had to use off-set bushings to set the camber correctly. I thought this sounded crazy, but since have learned this is common with motor homes.10) Replaced Generic Plastic Bathroom Faucet With A Nice Pivoting One
When you need the sink clear, simply swivel the faucet aside like a kitchen faucet. The reach is also much longer than the original, so washing up does not involve pressing hands against the side of the sink bowl.11) Drop In Sink Screen & Rubber Stopper
No more lost items down the drain. The screen is sold at all home improvement centers and hardware stores. I think it is called a 1 inch drain basket. It simply drops in and lifts out.12) Folding Shower Stool
Works great, is very strong, and folds up very thin.
Cost Of Stool $15 at Bed Bath & Beyond
Here is where we store the shower stool so the shower pan has room for our collapsible laundry hamper.13) My Wife Irene's Handy Work With Curtians & Pillows
The original curtians were a lighter green, not matching the green vinyl trim. The new curtians match perfect, and adding matching pillows too.
Our rig had no sink window curtians so Irene made a set for it too.14) Self-Storing Dish Rack, Fit's Perfectly!15) Towel Rack Over Toilet In Bathroom
The picture shows only one towel in each, but we fold-n-roll and stand up all needed towels to fit during trips. The upper for me, the lower for my wife.16) Nicely Stored 2' x 4' Fold-In-Half Folding Table With 4 Height Settings
Made by Lifetime, this height adjustable folding table stores perfectly in the rear storage compartment.CLICK HERE
to get to Lifetime's website.CLICK HERE
to get to this specific table. The video shows it's ease & versatility after the 20 second intro of the company.
Stores Easily Inside Rear Compartment
Shown Set At It's Highest Setting
Highest - nice for a cooking work surface
Middle setting - nice for eating at with regular lawn chairs
Lowest setting - nice with low lounge chairs17) Adding A Splash Shield For The Battery Compartment, Protection From Tires
Write-Up With Many Pictures, Click Here-----> http://www.flickr.com/photos/37432012@N08/sets/72157622075091526/
AFTER18) Installed a 19" Widescreen TV/DVD Combo In Bedroom Area
The TV overhangs the cabinet on the isle side, but is flush with the cabinet door. It does not interfere much when getting in and out of bed. Well worth it to us. Widescreen DVD movies are enjoyed in bed. This TV uses much less inverted power than the main TV with sound system.
No concern of draining the batteries when watching TV in bed. 19) Replacing Ford Single CD Radio With Ford 6-CD Radio
Used ones are sold cheap on eBay. I paid $70 with shipping. Fairly easy to swap radios. If you are going to do it, first remove your old radio so you can compare connectors while internet shopping. There are a few different connector designs that look similar and you'll need the one that matches your Ford chassis. 20) Replacing Barrel Chair With A 3rd Captain Seat
Replaces the barrel chair in minutes. Much more comfortable and more safe than the original barrel chair.21) Wired Backup Lights To Switch By License Plate For After Dark Dingy Tow Hookup & Unhooking22) Relocated Backup Monitor To The Mirror Position & Added Scanguage-II
Now I don't hit my head on the monitor anymore, and it is so much easier to glance at.
Universal bracket kit part number is 250-8088 at T&A Service and Supply 800-658-3423 $48 plus shipping23) Replacing The 5 small Galley Cabinet Drawers With 3 Huge Capacity Heavy Duty DrawersClick Here
for all the details. This increased our drawer storage by over 85%, nearly doubling it.24) Converting From Florescent & Incandescent To LED Lighting, Warmer Light At Half The PowerClick Here
for all the details.
I converted all 9 florescent light fixtures to warm white LEDs, and added an LED mood/night light to each, controlled by a new (black) 3-way switch.
Note the 3 LED nightlight circuit on the side. When all nightlights are on, they offer very nice cozy atmosphere throughout the cabin. Each nightlight it is only 0.275 watts.
The pair of long LED strips generated so much light that it was hard on the eyes so I disabled every 3rd circuit for the proper amount of light and reduced power down to 4.33 watts. .
The closet, shower, outdoor storage, porch, and Sanicon lights all got sealed & frosted LED bulbs that use one tenth the energy.25) Reinforced The Fridge Door Hinges
The fridge door lower hinge can break on very rough roads when heavy items are stored in the door pockets.
These reinforcements resolve any such concern. As shown, I put one on every hinge.26) Added two 12V Outlets In The Center Console
(one of the two has two USB outlets)
This moves all our charging wires away from the gear shift lever area for safer driving, provides easy access for the passenger, and clears our cup holders of most electronics.
Power is received from the high-power cigarette lighter outlet.
The dark gray wire seen under the radio, supplies power to the outlets.
Not seen is a hidden in-line connector to disconnect the center console, required to remove the engine shroud.
Cost Of Project $7.85 (wires & connector not considered)27) Added A 3-Way Display, Volt Meter, Clock, And Temperature, In The Stove Hood Control Panel
Cost Of Project $24.43