Hello Guest

Prepping the Cutting Board

  • 1 Replies
Prepping the Cutting Board
« on: November 19, 2009, 07:51:25 pm »
The cutting board in our 2350 is a nice block of hardwood and it is a solid surface to use for food prep. It is best for slicing dry foods such as bread. As a porous surface, it would be unsafe if any food liquids soaked in and provided a home for bacteria. We decided to treat the board to make it less permeable and make cleaning the surface easier. I found an interesting article for treating cutting boards at http://whatscookingamerica.net/CuttingBoards/AllAbout.htm.

While you can buy “special” cutting board treatments, we went the route suggested in the article. We applied a heavy coat of mineral oil twice a day for a week. After a week, the oil took an hour or so to soak in completely. Then we used beeswax dissolved in hot mineral oil for two coats, and a final wax with just beeswax. The surface is now more resistant to spills and the beeswax has a nice fragrance.
~ ~ ~ ~ ~ (\_ ~ (\_ ~ (\_~ ~ ~ ~



  • ******
  • 740
  • our 3rd PC--Custom 2910
    • View Profile
  • OwnPC: Yes
  • NewUsed: New
  • PurchDate: March 2012
  • Model: 2910
  • ModelYear: 2013
  • Slide: Yes
  • IntColor: cherry
  • ExtColor: slate gray full body paint
  • Location: Florida
Re: Prepping the Cutting Board
« Reply #1 on: November 20, 2009, 10:39:18 am »
Thanks for that advice on the cutting board.

We just (11/16/09) placed our order for a 2350 Sprinter and any tips would be very helpful.

Judi and George Nicholson
Punta Gorda FL