I traced the wiring and drew them up.
Keelhauler,Thanks for putting together the schematic. I think I have a good understanding of my 2010 2551 wiring but it seems different from your schematic in one area. You show three 12V lines going to the generator through circuit breakers, what would that be for? On mine, those circuit breakers feed three things directly without going through the converter fuses; the slide, the maserator pump, and I forget the third. Bob
I checked my 2010 2551 today and found the following. The three circuit breakers shown going to the generator in your schematic go to the Sani-Con pump (20A), the slide motor (20A), and the third is the charging line from the engine battery/alternator (40A).